NiFe Alloy Invar 36

NiFe Alloy Invar 36

Invar 36  material grades and equivalents:

Trademark	GB	ASTM	UNS	W.Nr	BS	AFNOR
Invar36	4J36	ASTM F1684/ ASTM B753	UNS K93600	W.Nr.1.3912	BS X1NiCrMoCu	AFNOR Fe-Ni36

Chemical composition:

Alloy	%	Ni	Cr	Fe	C	Mn	Si	Co	Mo	P	S
Invar 36	Min.	35		Balance
	Max.	38	0.5		0.1	0.06	0.35	1.0	0.5	0.02	0.025

Mechanical properties:

Density	8.1 g/cm3
Melting point	1430 °C

Characteristic as below：

Invar 36 is a special ultra-low coefficient of heat expansion of low-iron-nickel alloy. One of carbon and manganese element of control is very important. Cold deformation can reduce the coefficient of thermal expansion, in particular within the framework of the heat treatment temperature coefficient of thermal expansion will enable stabilization. Has the following characteristics:
1.Has very low coefficient of heat expansion between the temperature of -250°C and 200°C.
2.Good toughness and plastic

Processing conditions and application:

Applied field

Invar 36 suit for need to apply ultra-low coefficient of heat expansion environment . Typical applications are as follows:

• Liquefied gas production, storage and transport

• The measurement and control instruments work temperature lower than 200°C, such as temperature regulating device

• Metals and other materials use the screw connector bush.

• Bimetal and bimetallic temperature controller

• Film framework

• Shadow mask