During the hot summer time days, the ice maker is our ideal buddy in the kitchen. But what if your ice maker suddenly stops making any ice, what are you to do? Effectively, my pal, you are in luck, mainly because this post will help you know the purpose why and what are the needed steps to perform in order to resolve the issue.
So, why is your ice maker not making any ice?
1. Energy connection
Prior to anything else, verify no matter whether your machine is connected to the power outlet, if it is, verify if the energy outlet is functioning nicely and is transmitting electric current. Then turn on your ice maker to check if it is okay or not. The wire along the suitable side of the machine ought to be lowered as far as it goes. If this is in a raised position, your machine is off and it will not make any ice.
two. Correct freezer temperature
If the icemaker wire is positioned appropriately and is turned on, proceed to verify the freezer temperature. The temperature ought to be within the range of to 8 degrees Fahrenheit. If it is above ten to 12 degrees, your machine will not produce ice.
For a newly installed icemaker, you will have to have up to 24 hours to let the machine function and cool down. A newly installed icemaker may not function until the ice mold temperature has dropped to about 15F – 16F degrees. If you have just added a water line to the refrigerator, it might take up to about an hour and a half for the machine to get started functioning. Also, a newly installed water line may have air in the line. It can from time to time take a handful of ice creating cycles to clear the line of air.
three. Check water supply
Okay, in order to make ice, you want water. So make تصليح فريزرات that there is water flowing to the ice maker. Check for kinks in the tubing and look out for frozen particles stuck within the water tube. Also make sure that the household water supply is turned on. At times the water inlet valve can go negative. If there is water in the ice maker, but it’s not freezing, use a freezer thermometer to verify that the temperature is cold adequate for it to freeze.
4. Verify copper supply
Make sure the copper provide line to the refrigerator is turned on under the sink, or coming from the basement.
Immediately after checking all the above pointed out elements and specific that the freezer is cold enough but it is nonetheless not producing any ice, check and really feel the bottom of the ice maker unit. This spot is usually cold for an ice maker operating smoothly. But if it is hot or warm, it is possible that the tiny heating element inside is stuck or broken. This heating element when turned on melts the bottom of the cubes so that they can be released and harvested by the ejector blades. In this case, you will have to replace this component in order to make your ice maker work smoothly once again.